Fabrication of a Dual-Purpose Implant Surgical Guide.

While surgical guides have allowed for more highly accurate immediate implant placement in the esthetic zone, only a few techniques have been described to predictably position an immediate implant provisional. Even fewer techniques have addressed repositioning a patient's extracted tooth for use as the interim implant restoration. This article describes a workflow for the fabrication of a dual-purpose surgical guide that allows for guidance of implant placement as well as repositioning of a decoronated tooth that will serve as a provisional. While other provisional techniques aim to recreate proper gingival contour, the benefit of repositioning of the original tooth is the preservation of the existing gingival margin position and existing critical contour of the emergence profile.

Provisional restorations (Part 2).

This chapter will emphasise the need to: 1) Provide a provisional restoration following tooth preparation to protect the pulp; secure positional stability, function and aesthetics; and maintain gingival health; 2) Consider using long-term provisional restorations to assess aesthetic, occlusal and periodontal changes before embarking on definitive restorations; 3) Distinguish between preparations for conventional and adhesive restorations when providing provisional restorations; 4) Determine in advance the type of provisional restorations and materials to be used, ideally, while treatment planning; 5) Be aware of materials for making provisional restorations and how to control potential hazards; and 6) Make provisional restorations to a high standard to ensure a predictable restorative outcome.

Ceramic Dental Implants: A Systematic Review and Meta-analysis.

Purpose: To evaluate the performance of one- and two-piece ceramic implants regarding implant survival and success and patient satisfaction. Materials and Methods: This review followed the PRISMA 2020 guidelines using PICO format and analyzed clinical studies of partially or completely edentulous patients. The electronic search was conducted in PubMed/MEDLINE using Medical Subject Headings (MeSH) keywords related to dental zirconia ceramic implants, and 1,029 records were received for detailed screening. The data obtained from the literature were analyzed by single-arm, weighted meta-analyses using a random-effects model. Forest plots were used to synthesize pooled means and 95% CI for the change in marginal bone level (MBL) for short-term (1 year), mid-term (2 to 5 years), and long-term (over 5 years) follow-up time intervals. Results: Among the 155 included studies, the case reports, review articles, and preclinical studies were analyzed for background information. A meta-analysis was performed for 11 studies for one-piece implants. The results indicated that the MBL change after 1 year was 0.94 ± 0.11 mm, with a lower bound of 0.72 and an upper bound of 1.16. For the mid term, the MBL was 1.2 ± 0.14 mm with a lower bound of 0.92 and an upper bound of 1.48. For the long term, the MBL change was 1.24 ± 0.16 mm with a lower bound of 0.92 and an upper bound of 1.56. Conclusion: Based on this literature review, one-piece ceramic implants achieve osseointegration similar to titanium implants, with a stable MBL or a slight bone gain after an individual initial design depending on crestal remodeling. The risk of implant fracture is low for current commercially available implants. Immediate loading or temporization of the implants does not interfere with the course of osseointegration. Scientific evidence for two-piece implants is rare.

Provisional restorations (Part 1).

This chapter will emphasise the need to: 1) Provide a provisional restoration following tooth preparation to protect the pulp; secure positional stability, function and aesthetics; and maintain gingival health; 2) Consider using long-term provisional restorations to assess aesthetic, occlusal and periodontal changes before embarking on definitive restorations; 3) Distinguish between preparations for conventional and adhesive restorations when providing provisional restorations; 4) Determine in advance the type of provisional restorations and materials to be used, ideally, while treatment planning; 5) Be aware of materials for making provisional restorations and how to control potential hazards; and 6) Make provisional restorations to a high standard to ensure a predictable restorative outcome.

Assessment of the effect of spacer material on gap and void formation in an endodontic temporary restoration using micro-computed tomography.

This study aimed to evaluate the effect of two spacer materials (cotton pellet and polytetrafluoroethylene [PTFE]) on gap and void formation in the Cavit restoration used for endodontic temporization. Thirty-four extracted human single-rooted premolars were matched and allocated into two groups (n = 17/group) according to the access cavity spacer (cotton pellet or PTFE). Standardized endodontic access cavities were prepared in all the teeth. Subsequently, the teeth were scanned by micro-computed tomography (micro-CT) to determine the volume of the access cavities. The teeth were then temporized by placing either cotton pellet or PTFE as spacer materials on the canal orifices, followed by the Cavit restoration. Following the temporization procedure, the teeth were subjected to a second micro-CT scan to determine the percentage volume of gaps and voids along the margins and within the Cavit restoration, respectively. Statistical analysis was performed using the Shapiro-Wilk and Wilcoxon signed-rank tests with a 5% significance level. The PTFE spacer was associated with significantly less gap formation between the Cavit restoration and the access cavity walls (P < 0.05) compared with the cotton pellet. No difference existed in void formation between the groups (P > 0.05). These findings indicate that the spacer material placed under the Cavit restoration can influence the quality of overlying restoration. PTFE was associated with less gap formation and, therefore, performed better than the cotton pellet as a spacer material beneath the Cavit restoration during endodontic treatment.

A Simple Technique to Create Accurate, Esthetic Immediate Implant Provisional Restorations: Hurricane Anti-rotation Wing.

Inserting a presurgically fabricated provisional restoration at the time of implant placement can be problematic if and when the provisional does not fit. The 3-dimensional position of the implant in the mouth typically is not as critical as the long-axis rotational orientation of the implant, which is known as "timing." During implant placement, it is often desirable to have one of the implant's internal hexagon flats in a specific rotational position (ie, timing) that enables the use of orientation-specific hexed abutments. Achieving timing with a high level of accuracy, however, is challenging. This article presents a proposed solution to this dilemma that eliminates any concern for implant timing during surgery by transferring the anti-rotation control from the implant's internal hex to the provisional restoration itself via the use of anti-rotational wing(s).

Knowledge and awareness of polycaprolactone and its applications as provisional material in prosthodontic practice: A questionnaire-based survey.

Aim: The present study was done to evaluate the knowledge and awareness of different provisional materials, especially polycaprolactone (PCL) and their application in prosthodontic practice. Setting and Design: A questionnaire based survey was carried out to assess the knowledge and awareness of PCL and its applications as provisional material in prosthodontic practice. Materials and Method: A questionnaire-based descriptive study consisting of 10 questions related to different provisional materials and their applications in prosthodontic practice was formulated on Google Forms. The link was created and circulated among the prosthodontist faculty members of various dental institutes and private practitioners of India with the use of digital platforms such as E-mail and social media. The data were collected and examined using Microsoft Excel software for statistical evaluation. Statistical Analysis Used: For this descriptive type of study, knowledge and awareness among prosthodontists across India was evaluated using Microsoft Excel software. Results: The use of PCL was known only to 20.75% of prosthodontists. Moreover, its application and indications are known to only <1% of the study participants. Autopolymerizing resin was most commonly used for the custom tray and temporary base fabrication as well as temporization in crown and bridge prosthesis, while muscle deprogrammer and surgical template were commonly fabricated in heat-cure and clear acrylic resin, respectively. Pattern resin was found to be commonly used in splinting implant impression copings. Conclusion: The use of PCL as a temporary denture base, custom tray, muscle deprogrammer, implant impression splinting, and provisional for crown and bridge and templates should be encouraged and incorporated to get benefits of its characteristic properties. Considering the overall performance of PCL, its use should be incorporated into prosthodontic research and practice.

Fiber-Reinforced Hybrid Prosthesis Veneered With Composite Resin for 4 Implant-Supported Fixed Provisional and Definitive Restorations.

This technical note describes the fabrication and benefits of fiberglass-reinforced hybrid prosthesis veneered with composite resin for 4 implant-supported fixed professional and final restorations. The described prosthesis reduces rehabilitation time, minimizes impression problems, and ensures a passive fit of professional restoration. The prosthesis provides immediate rehabilitation of 4 implants with ease of adjustments and repair during the entire provisional phase. Moreover, it can be easily converted to final restoration with minimal modifications, excellent esthetic results, and reduced costs.

Flexural strength and Vickers hardness of milled and 3D-printed resins for provisional dental restorations

Various forms of temporary resins are offered on the market; however, the properties of temporary resins obtained by milling and 3D printing have not been fully examined. This study aimed to compare the flexural strength and Vickers hardness of milled and 3D-printed resins. Methods: Three resins were tested: Evolux PMMA (milled resin), Cosmos Temp (3D-printed resin), and Structur 2 SC (bis-acrylic resin, group control). Specimens were prepared with rectangular shapes (n = 12) for flexural strength measurements and disc shapes (n = 9) for Vickers hardness tests. Flexural strength tests were performed at a crosshead speed of 0.75 mm/min, and the Vickers hardness was measured under a load of 20 N for 10 s. The obtained data were subjected to the Kruskal­Wallis test. Results: A significant difference (p < 0.05) in flexural strength was observed among the three sample groups: Evolux PMMA (111.76 MPa), Structur 2 SC (87.34 MPa), and Cosmos Temp (56.83 MPa). No significant difference (p < 0.05) was observed between the Vickers hardness values of Structur 2 SC (33.37 VHN) and Evolux PMMA (29.11 VHN); however, both materials were statistically superior to Cosmos Temp (10.90 VHN). Conclusion: While the mechanical properties of the milled resin were superior or similar to those of the bisacrylic resin, the 3D-printed resin was statistically inferior to both the milled and bis-acrylic resins

Comparison of Fracture Resistance between Implant-supported Bis-acryl Interim 3-unit FDPs Using Six Different Strengthening Mechanisms: An In Vitro Study.

AIM: To investigate six different strengthening mechanisms for three-unit implant-supported provisional restorations. MATERIALS AND METHODS: Six techniques of provisional fixed prostheses (PFP) reinforcement were investigated and were assigned to different groups (n = 10): group (ZP) zirconia powder, group (SK8) silk thread wrapped as a figure-of-8 pattern around middle third of abutment, group (RC8) size 00 retraction cord wrapped as a figure-of-8 pattern around middle third of abutment, group (RF8) Resin impregnated glass fiber ribbon wrapped as a figure-of-8 pattern around abutment, group (KV8) Kevlar 29 cord wrapped as a figure-of-8 pattern around middle third of abutment, group (KV) Kevlar 29 strands incorporated in resin mix. Compared against unenforced bis-acryl as control group (CL). Seventy Metal Dies were 3D printed having Soft Tissue Gingiva Mask. Using a custom-made silicone Index, 70 PFP were fabricated (10 of each group) and were cemented to their corresponding metal dies using zinc polycarboxylate cement. All specimens were thermal cycled for 1000 cycles using order of 20 seconds at 55°C and 20 seconds at 5°C with 10 seconds transport. Fracture resistance test was done using universal testing machine. All specimens were loaded to failure. Data were collected, tabulated and statistically analyzed. RESULTS: Kolmogorov-Smirnov normality test showed no significant difference between data in each group. So, data are normally distributed in each group. Descriptive statistics showed higher mean values of CL group (780.8 ± 164) followed by RF8 group (614.2 ± 158.2), followed by RC8 group (550.2 ± 339.2), followed by KV8 group (442.1 ± 198.4), followed by KV group (403.9 ± 306), followed by SK8 group (175.9 ± 90.8), and finally ZP group (136.5 ± 135.7). One-way ANOVA revealed significant difference between the tested groups (p = 0.036). CONCLUSION: Bis-acryl provisional restorations had better mean fracture resistance values than all other strengthening mechanisms. Bis-acryl provisional restorations did not gain more strength by any of the added materials. One-way ANOVA revealed significant difference between all tested groups. CLINICAL SIGNIFICANCE: Provisional restorations over implant should be strong enough to serve for the long period of bone and tissue healing. Current materials alone cannot survive for long. It serves as temporization between steps of fixed restorations construction. How to cite this article: Rayyan M, Sayed M, Hujeiry AM et al. Comparison of Fracture Resistance between Implant-supported Bis-acryl Interim 3-unit FDPs Using Six Different Strengthening Mechanisms: An In Vitro Study. J Contemp Dent Pract 2023;24(11):840-846.

Factors associated with decision-making for replacing the temporary coronal restoration after endodontic treatment

Aim: This study aimed to evaluate the decision-making by patients to replace temporary restorations with permanent restorations after endodontic treatment and to verify the associated factors and evaluate the quality/integrity of the temporary restorative material within one month. Methods: This is a cross-sectional study using non-probabilistic sampling which analyzed patients after one month of endodontic treatment. The self-administered questionnaire contained sociodemographic, treatment decision-making and endodontic treatment questions. The restoration present in the mouth was evaluated in the clinical oral examination. The Poisson Regression test was used to verify the prevalence ratio. Results: The prevalence failure to perform permanent restorations was 61.1% of patients, and 42.7% reported not having adhered. The reasons are lack of time and not knowing the importance of replacing the restoration with a definitive one. The glass ionomer temporary restorative frequency was higher among those who chose not to replace the temporary restoration with a permanent one (PR=5.19; 95%CI 2.10-12.33). In addition, there was an association between the quality of the restorative material and the type of material, and the best clinical quality of the restoration was statistically associated with glass ionomer and composite resin. Conclusions: The findings show the importance of guidance by the dental surgeon in helping patients decide to replace their temporary restoration

Effects of resin materials dedicated for additive manufacturing of temporary dental restorations on human gingival keratinocytes.

OBJECTIVE: This study investigated the effect of eluates of conventional and 3D-printed resin materials for manufacturing temporary dental restorations on gingival keratinocytes. METHODS: Three-dimensional (3D)-printed resin materials: 3Delta temp (Deltamed), NextDent MFH (Nextdent), Freeprint temp (Detax), GC temp (GC), were compared to Grandio disc (Voco) and Luxatemp (DMG). Human gingival keratinocytes (IHGKs) were exposed to eluates of the materials and XTT assays were performed at 24 h, 48 h, 72 h, or 144 h. For quantification of the proinflammatory response, the protein amount of IL-6 and 8 was determined in the supernatants using ELISA. One-way ANOVA with post hoc analysis was used to compare differences in cell viability and IL-6 and IL-8 levels between groups. RESULTS: At 24 h, and more remarkably at 48 h, a significant decrease in cell viability occurred for the 3D-printed materials compared to the untreated IHGKs, but also compared to Grandio disc and Luxatemp. Except for the expression of IL-8 in presence of the eluate of Grandio disc at 24 and 48 h, all tested materials caused attenuation of IL-6 and 8 from IHGKs for any observation period. CONCLUSIONS: The materials for additive manufacturing affect cell proliferation differently than the subtractive manufactured material Grandio disc and the conventional material Luxatemp. CLINICAL SIGNIFICANCE: In comparison to conventional and subtractive manufactured restorations, 3D printed temporary restorations might induce more negative effects on the gingival and probably also on pulpal health since viability and the proinflammatory response of oral keratinocytes are more intensively affected by these materials.

A digital workflow for accurately and rapidly creating an immediate provisional restoration with natural emergence profile using extracted tooth.

To describe a digital workflow for creating a provisional restoration by using an extracted tooth rapidly, finally fixing the provisional restoration in the targeted position precisely and preserving the natural emergence profile from the time of provisional restoration to final restoration. CLINICAL CONSIDERATIONS: The use of extracted tooth as an immediate provisional restoration is an effective method for preserving the shape of the emergence profile. However, the existing methods for creating a provisional restoration by using natural tooth are time-consuming and there is no reliable method to precisely attach tooth to temporary abutment. This case demonstrates a new method for using patient's natural tooth as an immediate provisional restoration under a sequence of guides, which significantly reduces the chair-side time and inconvenience for clinicians and patients. Immediate provisional restoration contributes to preserving the soft tissue architecture after post-extraction implant placement, especially when using the patient's tooth as a provisional restoration. Digital technology can help to improve the chair-side clinical efficiency of dentist. CLINICAL SIGNIFICANCE: Maintaining the natural soft tissue architecture is a huge challenge in dental implantology. Use of the extracted tooth as a provisional restoration is likely to achieve an optimal outcome. And digital technology is helpful to the efficiency and accuracy of treatment.

The biotransfer approach: The use of an alveolar cast die for the fabrication of the emergence profile on implant-supported interim restorations.

Maintaining natural-looking soft tissues around dental implants is one of the biggest challenges for the restorative team. To achieve this, the emergence profile of the preexisting teeth in the alveolus can be emulated rather than conditioning the soft tissue architecture arbitrarily. The biotransfer technique uses an interim restoration with a biologically driven emergence profile fabricated before the implant surgery.

Influence of different separating mediums applied on the immediate dentin sealing in the tensile strength of temporary restorations / Influência de diferentes agentes isolantes aplicados sobre o selamento dentinário imediato na resistência à tração de restaurações provisórias

Objective: To evaluate the ability of different separating mediums to prevent adhesion between provisional restorations and hybridized dentin surfaces when used with the Immediate Dentin Sealing technique (IDS). Material and Methods: 120 extracted human teeth ­ 40 premolars and 80 molars ­ were selected to integrate acrylics samples separated into 4 different groups (n=10) according to the separating medium used for IDS protection. Forty samples were made of three teeth mounted in a self-cure acrylic resin block (Jet, Classic, São Paulo, Brazil) arranged side by side, simulating the positioning and proximal contacts present in the dental arch between the second premolar, first molar and second molar. A standard dental preparation for ultra-thin occlusal veneer was performed and complete occlusal dentin exposure was achieved by selective removal of the occlusal enamel with a high-speed conical round burr (Code: 1801.4138 FG, KG Sorensen, Medical Burs Ind. e Com. de Pontas e Brocas Cirúrgicas Ltda, São Paulo, Brazil). Dentin hybridization were performed on the control group and 3 different groups of separating mediums (n=10): PC­commercial provisional separating agent (Pro-V Coat, Bisco, Schaumburg, USA); GG­glycerin gel (K-Y Gel; Johnson & Johnson Industry and Commerce LTDA, São Paulo, Brazil); PJ­petroleum jelly (Rioquímica, São Paulo, Brazil). Provisionalization were manufactured on the prepared teeth. After 2 weeks, the tensile test was performed, and the analysis of the failure pattern was performed by 3D laser confocal microscopy and Scanning Electron Microscopy (SEM). The data were analyzed with the 1-way ANOVA and the Tukey test (α = 0.05). Results: Significantly lower tensile strength values were found for the commercial provisional separating agent (30.39 ± 10.01 N) compared to others (p < 0.05). Conclusion: The commercial provisional separating agent showed greater effectiveness on protecting hybridized dentin against the provisional restorations (AU)

Objetivo: Avaliar a capacidade de diferentes agentes isolantes em prevenir a adesão entre as restaurações provisórias e a superfícies de dentina hibridizadas quando usados com a técnica do Selamento Dentinário Imediato (IDS). Material e Métodos: 120 dentes humanos extraídos - 40 pré-molares e 80 molares - foram selecionados para integrar as amostras de acrílico divididas em 4 grupos diferentes (n = 10) de acordo com o meio de separação usado para proteção IDS. Foram confeccionadas 40 amostras de três dentes montados em um bloco de resina acrílica autopolimerizável (Jet, Classic, São Paulo, Brasil) dispostos lado a lado, simulando o posicionamento e os contatos proximais presentes na arcada dentária entre o segundo pré-molar, primeiro molar e segundo molar. Um preparo dentário padrão para laminado oclusal ultrafino foi realizado e a exposição completa da dentina oclusal foi obtida pela remoção seletiva do esmalte oclusal com uma broca cônica arredondada de alta rotação (Código: 1801.4138 FG, KG Sorensen, Medical Burs Ind. E Com. de Pontas e Brocas Cirúrgicas Ltda, São Paulo, Brasil). A hibridização da dentina foi realizada no grupo controle e em 3 grupos diferentes de agentes isolantes (n = 10): PC - agente de separação provisório comercial (Pro-V Coat, Bisco, Schaumburg, EUA); GG ­ gel de glicerina (K-Y Gel; Johnson & Johnson Industry and Commerce LTDA, São Paulo, Brasil); PJ ­ vaselina (Rioquímica, São Paulo, Brasil). As restaurações provisórias foram fabricadas nos dentes preparados. Após 2 semanas, foi realizado o teste de tração, e a análise do padrão de falha foi realizada por microscopia confocal a laser 3D e Microscopia Eletrônica de Varredura (MEV). Os dados foram analisados com a ANOVA de 1 fator e o teste de Tukey (α = 0,05). Resultados: Valores de resistência à tração significativamente menores foram encontrados para o agente separador provisório comercial (30,39 ± 10,01 N) em comparação com os demais (p < 0,05). Conclusão: O agente separador provisório comercial mostrou maior eficácia para a proteção da dentina hibridizada contra as restaurações provisórias (AU)

Color and surface gloss stability of bis-acryl and resin composite after exposure to cigarette smoke / Estabilidade de cor e brilho superficial de resinas compostas e bisacrílicas após exposição por fumaça de cigarro

Objective: To evaluate color and surface gloss stability of bis-acryl resins and resin composites, submitted to artificial staining with cigarette smoke. Material and Methods: Specimens of each material were prepared (n=15). Two resin composites (GrandioSO [RCG], Filtek Supreme [RCZ]) and five bis-acryl resins (Luxatemp Star [BisLUX], Protemp4 [BisPRO], Structor3 [BisSTR], Visalys Temp [BisVIS] and Yprov [BisYPR]) were tested. Initial color was assessed using a spectrophotometer and surface gloss with a glossmeter. Samples were submitted to smoke exposure (10 cigarettes under 8 minutes per cycle). After 3 and 6 cycles, color and gloss were reassessed. Final readings were performed after brush prophylaxis. Data were analyzed using two-way repeated ANOVA and Tukey's test (p<0.05). Results: Differences and interaction of factors (p<0.01) were detected for both color and gloss readings. Resin composites were the least affected by aging, with gloss reduction after prophylaxis. Differences were detected among bis-acryl resins, with better results for BisLUX and BisPRO. BisPRO and BisSTR, showed reduction in gloss after 60 cigarettes, while BisYPR gloss decreased at all evaluated periods. Conclusion: Resin composites are less susceptible to changes after smoke exposure, while bis-acryl resins results are brand-dependent. Prophylaxis negatively influenced the surface gloss of most of the tested materials (AU)

Objetivo: Avaliar a estabilidade de cor e brilho superficial de resinas compostas e bisacrílicas, submetidos ao manchamento artificial por fumaça de cigarro. Material e Métodos: Foram preparados espécimes de cada material (n=15). Duas resinas compostas (GrandioSO [RCG], Filtek Supreme [RCZ]) e cinco resinas bisacrílicas (Luxatemp Star [BisLUX], Protemp4 [BisPRO], Structor3 [BisSTR], Visalys Temp [BisVIS] e Yprov [BisYPR]) foram testados. A cor inicial foi avaliada usando um espectrofotômetro e o brilho de superfície com um medidor de brilho. As amostras foram submetidas à exposição de fumaça de cigarro (10 cigarros com até 8 minutos por ciclo). Após 3 e 6 ciclos, a cor e o brilho foram reavaliados. As leituras finais foram realizadas após a profilaxia escova de robinson. Os dados foram analisados usando de medidas repetidas e teste de Tukey (p<0,05). Resultados: Foram detectadas diferenças e interação de fatores (p<0,01) tanto para leituras de cor quanto para leituras de brilho. As resinas compostas foram as menos afetados pelo envelhecimento, com redução do brilho após a profilaxia. Foram detectadas diferenças entre as resinas bisacrílicas, com melhores resultados para BisLUX e BisPRO. BisPRO e BisSTR, mostraram redução de brilho após 60 cigarros, enquanto que o brilho da BisYPR diminuiu em todos os períodos avaliados. Conclusão: As resinas compostas são as menos suscetíveis a mudanças após a exposição à fumaça, enquanto os resultados das resinas bisacrílicas são dependentes da marca. A profilaxia influenciou negativamente o brilho de superfície da maioria dos materiais testados.(AU)

Effect of Three Different Cooling and Insulation Techniques on Pulp Chamber Temperature during Direct Temporization with Polymethyl methacrylate-based Resin.

AIM AND OBJECTIVE: This in vitro study evaluates and compares the changes in pulp chamber temperature during direct fabrication of provisional restorations in maxillary central incisors after using three different cooling techniques. MATERIALS AND METHODS: Total of 60 samples of maxillary central incisors along with their putty indices were divided into four groups (one control and three experimental) and were prepared using a surveyor cum milling machine. Teeth were sectioned 2 mm below cementoenamel junction and a K-type thermocouple wire was inserted in the tooth and secured at the pulpal roof using amalgam. Putty index filled with DPI tooth molding resin material [polymethyl methacrylate (PMMA)] was placed on the tooth and temperature changes per 5 seconds were recorded by temperature indicating device for the control, on-off, precooled putty, and dentin bonding agent (DBA) group. RESULTS: The highest mean obtained was of the control (11.04°C), followed by DBA group (9.53°C), precooled putty group (6.67°C), and on-off group (1.94°C). Precooled putty index group took maximum time to reach the baseline temperature (847.5 seconds). CONCLUSION: On-off technique is the most effective method to reduce the intrapulpal temperature during polymerization, as compared to the other techniques used in the study. Retardation in the polymerization process was seen in precooled putty group, which may make this technique clinically inadvisable. CLINICAL SIGNIFICANCE: Thermal protection of pulp must always be considered during direct fabrication of provisional restoration when a PMMA-based resin is used. By using on-off technique, not only the thermal insult to the pulp can be effectively minimized but also the harmful effects of residual monomer (poor marginal fit and pulpal irritation) can be eliminated.

SAT: Sistematización Adhesiva Temporaria. Integración estético-oclusal predecible en rehabilitación conservadora. Informe de caso y revisión bibliográfica / TAS: Temporary Adhesive Systematization. Predictable aesthetic-occlusal integration in conservative rehabilitation. Case report and bibliographic review

Objetivos: Realizar una revisión de la literatura sobre métodos de rehabilitación mínimamente invasivos, y presentar un caso clínico acerca de un nuevo procedimiento denominado sistematización adhesiva temporaria (SAT), destinado a pacientes que presentan pérdida de sustancia dentaria y que se caracteriza como un abordaje terapéutico predecible para transferir el proyecto rehabilitador (encerado) a la boca del paciente mediante 3 pasos bien definidos y con objetivos específicos. Caso clínico: Un paciente adulto joven de sexo masculino con desgastes severos por bruxismo es rehabilitado temporalmente con resinas compuestas (SAT) para devolver la anatomía perdida en forma adhesiva y conservadora, siguiendo un protocolo de abordaje terapéutico predecible denominado EGOP (estéticamente guiado y oclusalmente protegido). Este procedimiento, que es considerado muchas veces de transición previo a las restauraciones finales, nos permite evaluar la estética, la oclusión y mejorar la comunicación entre el equipo de trabajo para poder realizar el cambio por restauraciones cerámicas en forma gradual. En aquellos pacientes que necesitan rehabilitaciones totales producto del desgaste dentario severo, la SAT puede ser una herramienta que facilite al odontólogo la posibilidad de restablecer los patrones oclusales y estéticos perdidos sin la necesidad de realizar desgastes dentarios y provisionales como se hacía clásicamente (AU)

Aims: To carry out a literature review on minimally-invasive rehabilitation methods and to present a clinical case on a new procedure called Temporary Adhesive Systemization (TAS), intended for patients that show a considerable loss of dental substance, characterized by a predictable therapeutic approach to transfer the rehabilitation diagnosis wax-up through 3 well defined steps and with specific objectives to the patient´s dentition. Clinical case: A young adult male patient with severe wear due to bruxism is temporarily rehabilitated with composite resins (TAS) to return the lost anatomy in a conservative way, following a predictable therapeutic approach protocol called EGOP (aesthetically guided and occlusally protected). This procedure, which is often considered transitional prior to final restorations, allows us to evaluate aesthetics, occlusion, improve communication between the working team and to be able to gradually change for ceramic restorations. In patients that need full rehabilitation due to severe dental erosion, TAS is a predictable procedure that helps the dentist to re-establish the loss of aesthetical and occlusal patterns, without the need of preparing the teeth for the classic provisional restorations (AU)

Immediate Implant Solution to Improve Long-Term Esthetics, Enhance Patient Satisfaction.

Fixed prostheses offer various advantages over conventional removable devices for immediate restoration of a fractured tooth in the esthetic zone. In this case report, a fixed solution is employed through the use of a same-day provisional restoration attached to an immediately placed dental implant. Utilizing biologics and an implant system that allows for excellent primary stability, this treatment modality offers a predictable method for achieving immediate implant placement and provisionalization. The minimally invasive technique facilitates the development and maintenance of soft- and hard-tissue contours to enable an optimal result in the final restoration.

Percepción de estudiantes respecto al recambio de restauraciones / Students' perception regarding the replacement of restorations

Introducción: El reemplazo de restauraciones defectuosas representa la mayor parte de la práctica del odontólogo, lo que lleva a una perdida mayor del remanente dentario ante cada reemplazo. Objetivo: Determinar si existe variación del criterio clínico en alumnos frente a la decisión de recambio en restauraciones de resina compuesta previo y posterior al reacondicionamiento. Material y Métodos: Estudio analítico transversal. Se contó con una muestra de 40 estudiantes de quinto año de un universo de 72. Se utilizó un set fotográfico, que contaba con restauraciones defectuosas, en uno o más parámetros según los criterios RYGE/USPHS, las cuales posteriormente se reacondicionaron, por lo que se contaba con las fotografías del antes y del después del tratamiento conservador. Se realizó una encuesta a partir de las fotografías mostradas en la cual debían indicar la elección de tratamiento. Resultados: Se observó que hay una gran variación de elección de tratamiento previo a ser reparadas con tratamientos conservadores: 38 por ciento y no conservador de 62 por ciento y frente a la misma restauración de resina posterior a haber sido intervenida la elección de tratamiento conservador fue de 83 por ciento y no conservador 17 por ciento. Mediante el Test de McNemar se obtuvo un p<0.0001 entre elección de tratamiento conservador por sobre el no conservador posterior a haber sido realizada el reacondicionamiento de la restauración. Conclusiones: Existe un cambio en la percepción sobre la indicación de tratamiento de restauraciones defectuosas, a favor de una alternativa conservadora, después de que han sido intervenidas con procedimientos mínimamente invasivos(AU)

Introduction: The replacement of defective restorations, which leads to a greater loss of the dental remnant before each replacement, represents the large majority of the dentist's practice. Objective: To determine if there is any variation in students´ clinical criterion in relation to the decision of replacement of composite resin restorations prior to and following reconditioning. Material and Methods: A cross-sectional analytical study was conducted. The sample was composed of 40 fifth-year students in a universe of 72. A set of photographs showing defective restorations in one or more parameters evaluated according to RYGE / USPHS criteria was used. They were later reconditioned, so there were photographs prior to and following conservative treatment. Based on the photographs shown, a survey in which they had to indicate the choice of treatment was performed. Results: We observed that there is a great variation in the choice of treatment prior to the repair with conservative treatments (38 percent) and non-conservative ones (62 percent), compared to the same resin restoration after the choice of conservative treatment (83 percent) and non-conservative one (17 percent). Using the McNemar Test, p<0.0001 was obtained between the choice of conservative treatment over the non-conservative one after the restoration reconditioning had been performed. Conclusions: There is a change in perception of the indication of treatment to repair defective restorations towards a conservative alternative after they have undergone minimally invasive procedures(AU)